擺閘簡介
擺閘，在軌道交通行業一般稱為拍拍門，其阻攔體(閘擺)的形狀是具有必定面積的平面，垂直于地上，經過旋轉搖擺完成阻攔和放行。阻攔體的原料常用不銹鋼、有機玻璃、鋼化玻璃，有的還選用金屬板外包特殊的柔性資料(削減碰擊行人的損傷)。 中文名擺閘外文名swing gate材 質304不銹鋼或許316通道寬單機小于或等于900MM通行方法雙向(感應開、感應關)擺臂傳動視點180度 Sluice sluice Swing gate, commonly known as slap gate in the rail transit industry, the shape of its blocking body (swing) is a plane with a certain area, vertical to the ground, through rotating swing to complete the blocking and release. Stainless steel, plexiglass and toughened glass are often used as the raw materials of the barrier, and some special flexible materials are also used to wrap metal plates (to reduce the damage of pedestrians). Swing gate material 304 stainless steel or 316 channel width single machine is less than or equal to 900MM traveling method bi-directional (induction on, induction off) swing arm drive viewpoint 180 degrees 擺閘 智能擺閘
橋式智能擺閘
由剛開始的外形橋形結構沿用至今的較為淺顯的稱號，由主機箱和兩個活動擺桿組成，擺桿可做180°或90°搖擺，以到達勸止或放行的目的。
柱式擺閘
主設備外形以立柱的方法呈現，可做到和橋式擺閘相同的功用，特色是本錢較低，占用空間較少等。
效果及構件
首要用于通道出入口辦理,通常的應用場所只允許人員經過，或拖帶行李的人員，及殘障人員通行?？紤]到擺閘較于翼閘可做到更寬的通道特性。大部份擺閘通道可稠濁行人、自行車，助力車、殘障車等一些非機動交通工具通行。
擺閘通用功用
1)擺閘故障自檢和報警提示功用，便利用戶保護及使用;
2)擺閘經過主控板上的內置小按盤，可編程設備的運轉狀況;
3)擺閘機械結構、感應雙重防夾功用，在擺臂復位的過程中遇阻時，主動中止或在默許的時刻內電機中止作業，默許延時后再次復位(直到復位為止)，且力度很小(≤2Kg);
4)擺閘聲、光報警功用：含不合法闖入、跟隨報警;
5)擺閘防沖功用，在沒有接納到開閘信號時，擺臂主動鎖死;
6)擺閘擺桿(臂)同步功用;
7)擺閘主動復位功用，開閘后，在規則的時刻內未通行時，體系將主動撤銷用戶的此次通行的權限，規范為翻開后5秒主動復位;
8)擺閘斷電后通道主動翻開，上電主動閉合;
9) 擺閘可與多種讀卡設備相掛接，接納繼電器開關信號作業;
10)擺閘可單向或雙向操控人員進出;
11)擺閘可直接經過辦理計算機完成長途操控與辦理;
Intelligent bridge swing gate
It consists of the main box and two movable swing bars. The swing bars can swing 180 or 90 degrees to achieve the purpose of dissuasion or release.
Column sluice
The shape of the main equipment is presented by the column method, which can achieve the same function as the bridge swing brake, featuring lower cost and less space occupation.
Effects and components
Mainly used for the passageway entrance and exit processing, usually the application site only allows people to pass through, or carry luggage, and disabled people to pass. Considering that the sluice can achieve wider channel characteristics than wing gates. Most of the swing gates can be used by thick pedestrians, bicycles, boosters, disabled vehicles and other non-motor vehicles.
Universal function
1) self checking and alarm prompting function to facilitate user protection and use.
2) the operation status of programmable device through the built-in small pad on the main control board.
3) Mechanical structure and induction double anti-clamping function. When the swing arm is blocked in the process of resetting, the motor stops working actively or at the tacit moment, and resets again after tacit delay (until resetting), and the force is very small (<2Kg);
4) sound and light alarm function: illegal intrusion, following alarm.
5) anti impact function, when the signal is not received, the swing arm is actively locked.
6) swing lever (ARM) synchronous function;
7) Active reset function, the system will actively revoke the user's permission to reset 5 seconds after the switch is opened, if it does not pass within the regular time.
8) after the power failure, the channel will turn on and turn on.
9) it can be linked to a variety of card reader devices to receive relay switch signals.
10) one way or two way manipulation of people in and out.
11) can be directly processed by computers to complete long-distance control and processing.
擺閘擴展功用：
1)擺閘計數、警報功用;
2)擺閘機箱加長，擺桿(擺臂)資料挑選;
3)擺閘廣告位燈箱挑選。
擺閘技術參數
擺閘外形尺寸：
橋式擺閘1550mm×2800mm×960mm
柱式擺閘：直徑168mm*1000mm
擺閘讀寫方法：ID卡、IC卡、磁卡、條碼儀等
擺閘分量：橋式60-70Kg，柱式35-40kg
擺臂長：300mm-650mm
擺臂最大承受力：30Kg
擺閘作業電壓：AV220V±10V，50Hz
擺閘電機功率：24V 30W
擺閘擺門時刻：0.2秒
擺閘輸入接口：+12V電平信號或脈寬信號≥100ms的DC12V，脈沖信號驅動電流≥10mA
擺閘通訊接口：RS485規范通訊間隔≤1200米
擺閘通行速度：40人/分鐘(常開)，25-30人/分鐘(常閉)
擺閘閘門開、關時刻：1-2秒
擺閘作業環境：室內、室外(陰棚)
擺閘溫度：-10℃—— 50℃ 相對濕度：≤90%，不凝露
擺閘首要結構和裝備：
橋式擺閘：◇主機箱2個◇擺門(擺臂)2個◇操控板1套◇機械機芯及傳動部分2個◇電源1個◇電機2個
柱式擺閘：◇主柱2根 ◇附柱4根◇附欄桿8根◇擺臂2個◇操控板2套◇變壓器4個◇電機2個 ◇機芯及傳動部分2套
擺閘的組成部份
擺閘結構組成：擺閘由機箱、機芯、擺臂、操控體系、紅外傳感器、操控設備等部分組成。
高級制動擺閘組成：機箱，制動機芯，操控體系，紅外傳感器，操控設備等部份組成(高級制動擺閘的優點是，能快速平穩停機，不存在晃動，不會呈現機械卡死結構，掉電后擺臂主動翻開。完全符合消防要求)
擺閘的功用特色
擺閘產品功用特色：
1)具有故障自檢和報警提示功用，便利用戶保護及使用;
2) 經過主控板上的內置小按盤，可在線編程設備的運轉狀況;
3) 防碰傷功用，在擺臂復位的過程中遇阻時，在規則的時刻內電機主動中止工
作，且力度很小;
4)防沖功用，在沒有接納到開閘信號時，擺臂主動鎖死;
5)擺臂同步可調(針對雙擺情況);
6)具有主動復位功用，開閘后，在規則的時刻內未通行時，體系將主動撤銷用戶
的此次通行的權限;
7)斷電常開，以滿足消防辦理的要求;
8)可與多種讀卡設備相掛接，接納繼電器開關信號作業;
9)雙向擺，單、雙向操控人員進出;
10)可直接經過辦理計算機完成長途操控與辦理;
11)延時主動復位，規范為翻開后5秒主動復位;
擺閘可擴展功用：
1)聲、光報警功用，含不合法闖入報警，防夾報警等;
2)計數功用;
3)紅外復位功用;
4)機箱加長，擺臂加長等。
擺臂規范： 規范擺臂 600MM(可適當加長或縮短)
擺臂傳動視點：180 度
擺閘搖擺方向： 單向或雙向
擺閘機箱資料： 規范 304 號不銹鋼或定制316號不銹鋼
擺閘電源電壓： AC220±10% V,50HZ
擺閘驅動電機： 直流無刷電機 140W/24V(或有刷電機)
擺閘電機轉速： 1600 轉/分(規范)
擺閘輸入接口： 繼電器開關信號或 12V電平信號或脈寬>100ms 的 12V脈沖信號，
擺閘驅動電流>1 0 m A
擺閘通訊接口： RS485 規范
擺閘通訊間隔： 1200 米
擺閘LED指示燈： 2個或許4個
擺閘讀 卡 窗： 2 個
擺閘通行速度： 40 人/分鐘(常開) ，25-30 人/分鐘(常閉)
擺閘閘門開、關時刻： 1-2秒
擺閘上電后進入通行狀況所需時刻： 3秒
擺閘呈現故障后的主動復位時刻： 10秒
擺閘作業環境：室內、室外
擺閘溫 度：-40℃——80 ℃
擺閘濕 度：5%—— 90%
Expansion function:
1) count and alarm function;
2) chassis lengthening and swing rod (swing arm) data selection;
3) selection of advertising light boxes.
technical parameter
Outline size:
Bridge swing gate 1550mm * 2800mm * 960mm
Column swing gate: diameter 168mm*1000mm
Read and write methods: ID card, IC card, magnetic card, bar code instrument, etc.
Component: bridge type 60-70Kg, column 35-40kg
Swing arm length: 300mm-650mm
Maximum bearing capacity of swing arm: 30Kg
Working voltage: AV220V + 10V, 50Hz
Motor power: 24V 30W
Swing door time: 0.2 seconds.
Input interface: +12V level signal or pulse width signal greater than 100ms DC12V, pulse signal drive current greater than 10mA
Communication interface: RS485 specification, communication interval is less than 1200 meters.
Speed: 40 person / minute (Chang Kai), 25-30 person / minute (Chang Bi)
Gate opening and closing time: 1-2 seconds
Working environment: indoor and outdoor (shade shed)
Temperature: -10 C - 50 C relative humidity: less than 90%, no condensation.
Primary structure and equipment:
Bridge type swing brake: _main box 2_swing door (swing arm) 2_control board 1 set_mechanical movement and transmission part 2_power supply 1_motor 2
Column swing brake: _2 main poles_4 attached poles_8 attached railings_swing arm 2 control board 2 sets_transformer 4_motor 2_movement and transmission part 2 sets
Components of floodgate
The swing brake structure consists of a chassis, a movement, a swing arm, a control system, an infrared sensor, a control equipment and other parts.
Advanced brake pendulum brake consists of chassis, brake movement, control system, infrared sensors, control equipment and other parts (Advanced brake pendulum brake has the advantage of fast and smooth shutdown, no shaking, no mechanical stuck structure, swing arm actively open after power failure. Fully comply with fire requirements)
Features of swing gate function
Product features:
1) self checking and alarm prompting function to facilitate user protection and use.
2) through the built-in small pad on the main control board, the operation status of the equipment can be programmed online.
3) Anti-collision function, when the swing arm is blocked in the process of resetting, the motor stops working actively in regular time
And the intensity is very small.
4) anti impact function, when the signal is not received, the swing arm is actively locked.
5) adjustable swing arm (for double pendulum).
6) Possessing the function of active reset, the system will revoke the user actively when the switch is opened and the user is not in the normal time.
The current jurisdiction;
7) cut off electricity frequently to meet the requirements of fire control.
8) it can be linked to a variety of card reader devices to receive relay switch signals.
9) two way swing, one way or two way to control people in and out.
10) can be directly processed by computers to complete long-distance control and processing.
11) delayed active reset, and standard reset after 5 seconds.
Extensible functions:
1) sound and light alarm function, including illegal entry alarm, anti clip alarm, etc.
2) counting function;
3) infrared reset function;
4) chassis lengthening and swing arm lengthening.
Swing arm specification: Standard swing arm 600MM (properly lengthened or shortened).
Swing arm transmission viewpoint: 180 degrees
Swinging direction: one way or two way.
Chassis information: Specification No. 304 stainless steel or custom No. 316 stainless steel.
Supply voltage: AC220 + 10% V, 50HZ
Drive motor: DC brushless motor 140W/24V (or brush motor)
Motor speed: 1600 R / min (specification)
Input interface: relay switch signal or 12V level signal or pulse width >100ms 12V pulse signal.
Driving current >1 0 m A
Communication interface: RS485 specification
Communication interval: 1200 meters
LED indicator: 2 or 4.
Card reading window: 2
Speed: 40 person / minute (Chang Kai), 25-30 person / minute (Chang Bi)
Gate opening and closing time: 1-2 seconds
The time required to enter the traffic condition after power up is 3 seconds.
Active reset time after failure: 10 seconds.
Working environment: indoor and outdoor
Temperature: -40 C - 80 C
Humidity: 5% - 90%
擺閘應用領域
Application areas
擺閘：立式圓角擺閘、橋式梯形擺閘、橋式梯形擺閘、橋式斜面擺閘、橋式圓角擺閘、雙機芯擺閘、鴨嘴擺閘，門禁通道辦理體系：首要用于企業，單位，會所，賓館，工廠，圖書館，小區，校園等場合
翼閘：橋式八角斜面翼閘、橋式船形翼閘、橋式梯形翼閘、雙機芯翼閘，旅游景點售票辦理體系：首要用于旅游景點，公園等場合
三輥閘：蝶形三輥閘、立式圓角三輥閘、橋式八角三閘輥、橋式八角斜面三輥閘、橋式梯形三輥閘、橋式圓角三輥閘、雙立柱三輥閘，影劇院售票檢票辦理體系：首要用于電影院，夜總會，俱樂部，KTV等娛樂場合
智能通道辦理體系：擺閘、三輥閘、翼閘類型展館售檢票辦理體系：首要用于展館，體育館，交流中心，交易中心等場所
Swing gate: vertical circular swing gate, bridge trapezoidal swing gate, bridge trapezoidal swing gate, bridge inclined swing gate, bridge circular swing gate, double-action swing gate, duck mouth swing gate, access control channel management system: mainly used in enterprises, units, clubs, hotels, factories, libraries, residential areas, campuses and other occasions
Wing lock: bridge octagonal inclined wing lock, bridge ship-shaped wing lock, bridge trapezoidal wing lock, double-core wing lock, ticket management system of tourist attractions: mainly used in tourist attractions, parks and other occasions
Three-roll gate: butterfly-shaped three-roll gate, vertical rounded three-roll gate, bridge-type octagonal three-roll gate, bridge-type octagonal inclined three-roll gate, bridge-type trapezoidal three-roll gate, bridge-type rounded three-roll gate, double-column three-roll gate, theater ticket processing system: primarily used in cinemas, nightclubs, KTV and other entertainment occasions
Intelligent channel management system: swing gate, three roll gate, wing gate type exhibition hall ticket management system: mainly used in exhibition hall, gymnasium, exchange center, trading center and other places